Automatic water softening feature and softening water technology
Automatic softener demineralized water is running and regeneration will each step of the realization of automatic control, and the time, flow or other sensors, etc. To start regeneration. The basic composition of automatic noted for Autotrol or multiple FLECK, valves, resin tank (001 * 7 resin), salt and piping system.
Automatic soft device features:
Water softening process automation: this equipment through the procedure control device, ion exchange resin regeneration process and automation.
Efficiency: the design is reasonable, soft resin effective working exchange capability.
The province: no special operation, convenient installation.
Non-toxic: body to lead-free brass or engineering plastics.
Save water, water rate is over 98%.
Save electricity: since the siphon principle, without salt pump.
Easy to adjust: according to need to adjust the regeneration cycle, and time.
Tanks anti-corrosion glass tank: stainless steel, plastic, steel material, to avoid pollution of resin.
Wide applicability: it can be used on industrial boiler, heat exchangers, air conditioning, laundry, bath equipment and food, pharmacy, electronic industries.
Demineralized water of technical indexes:
1, water pressure: 0.25 -- 0.45, best of 0.3 MPa MPa,
2, the water hardness, mmol/L than 6.5 (if more than the original hardness index, need to be redesigned),
3, water hardness, mmol/L than 0.03,
4 and water temperature: 2-50 ° c,
5, power, power AC22DV: 10-50W isolator,
6, resin types: 00lx7 strong acid cation resin (optional); import and domestic brand,
7 and body materials, high strength plastic or brass,
8 and tanks material: according to requirements (FRP coil configuration, stainless steel lining rubber tank),
9 and water consumption: < produce a water yield of 2%, Salt consumption: < 100 grams/KeDangLiang, consumption: 3-40 w